Skip to content

Service

Drilling, Tapping & Slotting in Navi Mumbai

Accurate holes, threads, internal keyways and slots for assembly-ready parts.

Drilling, Tapping & Slotting: how we handle it.

Holes, threads and slots are what allow parts to bolt together and transmit drive. They look simple, but a bolt circle that is slightly out or a keyway cut off-centre is what stops an assembly going together on site.

We drill, ream, counterbore and tap holes in plates, flanges and housings, and cut internal keyways and slots on slotting machines. The work is marked out or set up from your drawing so that hole positions match the mating part.

Drilling, Tapping & Slotting in progress

Representative image of the process.

What we can do

  • Drilling and reaming of through and blind holes
  • Bolt-hole circles on flanges and covers
  • Tapping of metric, BSP and other thread forms
  • Counterboring, countersinking and spot facing
  • Internal keyways in hubs, pulleys, gears and couplings
  • Slots and internal profiles by slotting

Typical parts and applications

  • Pipe flanges and blind flanges
  • Coupling halves and pulley hubs
  • Base plates and mounting brackets
  • Gear and sprocket bores
  • Manifold and valve blocks

Industries that use this service

FAQ

Drilling, Tapping & Slotting: common questions

Can you drill flanges to a standard?

Yes. Tell us the flange standard, size and rating, or give the pitch circle diameter, hole size and number of holes, and we will drill to match.

Do you cut internal keyways?

Yes. Internal keyways in bores are cut on a slotting machine. We need the bore diameter and key width, or the shaft and key the part will fit.

Can you remove broken taps or repair damaged threads?

Often, yes. Depending on the part we can extract the broken tool, re-tap to the next size or fit a thread insert. Send a photo of the damage.

Send us your drawing. We’ll make the part.

Share a drawing, a sample or a photo with dimensions. We will come back with price and delivery, usually the same day.

Or use the enquiry form