Skip to content

FAQ

Frequently asked questions

Straight answers about how we work, what we can make and how to get a quote.

General

Working with Alhamd Technologies

What does Alhamd Technologies do?

We are a machining and fabrication workshop in Rabale, Navi Mumbai. We make and repair industrial components to your drawing or sample using CNC machining, lathe work, milling, drilling, tapping, slotting, band saw cutting, welding, wire cut EDM and laser and plasma cutting.

Who runs Alhamd Technologies and when was it established?

Alhamd Technologies was established in Navi Mumbai in 2008 by Mr. N. Hassan Khan, a machinist with over 25 years of experience in Indian and Gulf workshops, from heavy-duty machining for oil and marine work to CNC operation.

Where is your workshop located?

H No. 1890, Bhim Nagar, MIDC Road, opposite R-303, near Masjid, Rabale Naka, Rabale, Navi Mumbai, Maharashtra 400701. We are close to Rabale railway station and the Thane-Belapur Road.

What are your working hours?

We are open from 8 am to 10 pm, Monday to Sunday.

How do I get a quote?

Send your drawing, sample photos, material and quantity on WhatsApp or email, call us on +91 90227 26250, or use the enquiry form on the contact page. We reply with price and delivery time.

Do you accept single-piece orders?

Yes. There is no minimum order quantity. We make one-off spares, prototypes and repeat batches.

Can you make a part without a drawing?

Yes. Bring or send the old part. We measure it, check how it fits the mating components and make a replacement.

Which materials do you work with?

Mild steel, carbon and alloy steels, stainless steel 304 and 316, aluminium, brass, bronze, cast iron and engineering plastics. You can supply material or we can source it.

Which industries do you serve?

Petroleum and petrochemical, oil and gas, soap manufacturing, crushing and quarrying, food processing, marine and general engineering.

Do you handle urgent breakdown jobs?

Yes. Because we are open late every day, urgent jobs are prioritised. Simple parts are often completed the same or next day when material is available.

Are you hiring machinists?

Yes. We are looking for skilled lathe operators and machinists. Call +91 90227 26250 or email thealhamdtechnologies@gmail.com to apply or to refer someone.

Which areas do you serve?

Customers across Navi Mumbai, Thane and Mumbai, including Rabale, Airoli, Ghansoli, Mahape, Turbhe, Pawne and Taloja. Parts can also be sent by transport or courier to other cities.

Can I supply my own material?

Yes. Customer-supplied bar, plate, castings and forgings are welcome and are kept identified through the job.

Do you repair worn shafts and machine parts?

Yes. Worn bearing seats, damaged threads and keyways and cracked fabrications are repaired by welding, sleeving and re-machining when repair is the sound and economical option.

What do you need from me to quote a CNC job?

A drawing or 3D model with dimensions and tolerances, the material grade, the quantity, and any finish or heat-treatment requirement. If you only have a worn or broken sample, send photos with a few key measurements and we will guide you from there.

Do you take single-piece and small-batch CNC orders?

Yes. We machine one-off spares and prototypes as well as repeat batches. For a single piece, programming and setup time is a larger share of the cost, so we will tell you honestly when conventional lathe or milling work would be the cheaper route.

Do you repair worn or damaged shafts?

Yes. Depending on the damage we rebuild the worn area by welding and turn it back to size, fit a sleeve, or machine a new shaft. We will tell you which option makes sense once we have seen the part.

Can you cut special threads?

We cut metric and inch threads, pipe threads such as BSP, and power-transmission forms such as square and trapezoidal threads. Send the mating part or the thread specification so the fit can be checked.

Do you cut keyways in shafts and bores?

Yes. External keyways on shafts are milled, and internal keyways in hubs, pulleys and gears are cut by slotting. Give us the shaft diameter and key size, or the mating part.

Can you mill parts I have already turned elsewhere?

Yes. We regularly take semi-finished parts for a milling operation only. Tell us which surfaces are finished so they are protected during clamping.

Do you machine parts after welding?

Yes, and it is one of the main reasons customers bring fabrication here. Welded structures move as they cool, so critical faces and bores are machined after welding to bring them back to size and alignment.

Can you weld stainless steel?

Yes. Stainless steel is welded with matching filler and cleaned afterwards. For food or chemical service, tell us the grade (304 or 316) and the finish you need.

Do you take cutting-only jobs?

Yes. Bring or send your material with a cutting list and we will cut it to length. We can also source the material for you.

How accurate is a band saw cut?

A band saw gives a square cut close to length that is ideal as a machining blank. Where the length itself is a finished dimension, we leave a small allowance and face the part on a lathe.

Can you drill flanges to a standard?

Yes. Tell us the flange standard, size and rating, or give the pitch circle diameter, hole size and number of holes, and we will drill to match.

Do you cut internal keyways?

Yes. Internal keyways in bores are cut on a slotting machine. We need the bore diameter and key width, or the shaft and key the part will fit.

When should I choose wire cut over milling?

Choose wire cut when the material is already hardened, when the profile has sharp internal corners or very narrow slots, or when the part is too delicate to clamp and cut conventionally.

Can EDM cut any material?

EDM works on any material that conducts electricity, however hard: tool steel, carbide, stainless steel, copper and aluminium. It cannot cut plastics, ceramics or other non-conductors.

Should I choose laser or plasma cutting?

Laser suits thin to medium sheet, small holes and parts that need a clean finished edge. Plasma suits thicker plate and parts that will be welded or machined afterwards. Tell us the thickness and use, and we will pick the more economical process.

What file format do you need?

A DXF or DWG file at 1:1 scale is ideal. A dimensioned PDF or hand sketch also works for simple shapes.

Still have a question?

Call or message us and talk to someone who works on the machines.

Or use the enquiry form